EVC2 *discontinued*


Out of stock

SKU: EVC2N4 Category: Tags: , , , , , , , ,


This product is sold out and will not be re-stocked

Instead please check out the EVC2SX


EVC2 SPI/UART/I2C-module with USB interface

The EVC2 aims to enable DIY users to get more out of their computer parts. It’s main focus is enabling digital or analog voltage control, but can also be used to modify various firmware on motherboards and graphics cards. If your product has failed a BIOS flash or micro controller firmware update, this tool may be able to help you revive it.

Product specifications

  • 3x I2C headers working at 3.3-5.0V
  • 1x UART header, TX 3.3V RX 3.3-5.0V
  • 1x SPI header with on-board supply (0.8-3.6V)
  • VMOD header for voltage sense and feedback adjustments (2x voltage reading, 2x current source/sink)
  • Built-in USB bootloader for firmware upgrades

Included accessories

  • USB cable Micro-B to Type-A 100cm
  • 1x 3-pin 2.54mm to 3-pin 2.54mm 40cm (I2C/UART)
  • 2x 3-pin 2.54mm to open end cable 40cm (I2C/UART)
  • 2x 2-pin 2.54mm to open end cable 40cm (VMOD)
  • 1x 1-pin 2.54mm to open end cable 40cm (Ground)
  • 20-pin splittable 2.54mm to 2.54mm cables 30cm
  • SPI-cable for Asus motherboards 20cm
  • SPI-cable for MSI motherboards 20cm
  • SPI-cable for Asrock motherboards 20cm
  • 1×10 2.54mm pitch pin header strip
  • 4x rubber feet + mounting

Optional accessories

  • OLED display
  • SOIC8/SOP8 Test Clip
  • SOIC16/SOP16 Test Clip
  • Asrock-2 SPI Cable (X570 and newer)

Latest software: https://www.elmorlabs.com/index.php/forum/topic/evc2-beta-software/
Latest firmware: https://www.elmorlabs.com/index.php/forum/topic/evc2-beta-firmware/

Additional information

Weight 0.1 kg