Please or Register to create posts and topics.

KTH Beta Software

The KTH software works by communicating with the device over a serial port. Any EVC2 with firmware 0009 (to be released) will be able to work as a USB to Serial adapter. You can also use other USB to Serial adapters, for example FT23x or CH34x-based modules. The connection should be made to the KTH UART RX/TX pins with the cables swapped on the serial adapter. Eg KTH RX should be connected to the serial adapter TX and vice versa.

Release 1.0.0.2

  • Added CSV logging functionality

KTH 1.0.0.2: https://1drv.ms/u/s!Atmpv-6qHr_6zdRaJepQctOIXXXmTg?e=rt9MfP

Release 1.0.0.1

  • Added write temperature to file functionality (ex for OBS Studio integration)

KTH 1.0.0.1: https://1drv.ms/u/s!Atmpv-6qHr_6zb8QTuVq1BQAAIBTqA?e=94tStb

Release 1.0.0.0

  • Initial release
  • Missing logging to file and gain calibration features

KTH 1.0.0.0: https://1drv.ms/u/s!Atmpv-6qHr_6zZg3BanSWZ_q7EExBQ?e=cOwbsr

 

Uploaded files:
  • kth_sw.PNG