Please or Register to create posts and topics.

EVC2S @ Asus Strix RTX2080Ti OC 11G

Hello everybody!

I want to get my Asus RTX2080Ti Strix OC 11G to the absolut limit, and so i ordered an EVC2S ๐Ÿ™‚ (Thanks for the very fast shipping to Austria!!)

Now i have 2 questions:

Where on the PCB do i find the RX and TX ? (Card is actually vertical installed incl. Backplate..) In videos there i can only see it from a 2080 FE.

What is the max. GPU Voltage i should try? Stock it runs at 1.05 or 1.063V.


I hope i will get some good answers, im really at the beginning of extreme OC ๐Ÿ™‚

Thanks! ๐Ÿ™‚

Hello Mike,

I've used Strix 2080Ti quite a bit myself with the EVC2. There's a MP2888 controller for the GPU voltage and uP9512 for memory, both should be auto-detected when you search for devices in the software. The pinout and location of the header on the graphics card is attached below. The pins should connect to the corresponding position on the EVC2S. Probably just go up in steps of 50mV or so and see if there's any improvement in clocks, up to around 1.20V should be no issue. Let me know if you have any other questions.

Uploaded files:
  • s2080ti_i2c.png
Mike_AUT has reacted to this post.

Thank you very much! Im going to try this all this week, i hope everything will survive ๐Ÿ˜€

Iยดm sry for this very late response!

Everything gone right, my 2080ti is alive, and all functions of EVC2S are running good!

GPU runs 2200MHz and more. i dont have any extreme cooling, but my Phanteks Glacier Cooler and the 480/60mm EK rad do their job good ๐Ÿ˜‰ i hope i will have time for a little OC and bench session at by balcony, as long its so cold outside ๐Ÿ˜€ we now have about 6 degrees.

Thanks for your help and this cool little EVC2S, Elmor! ๐Ÿ˜‰

Greetings from Austria!

elmor has reacted to this post.